Oscam - PrismCube Ruby - problém

[motofun]

Ahojte, je to moje prvé téma na tomto fóre, ale už akú takú skúsenosť mám s cccam, mghcamd, ale oscam nie. Doteraz som mal dm800HD a teraz skúšam RUBY. Použil som config s DM800, kde mi to super, ale na Ruby to ani za bo*a nejde. Kto má skúsenosť s oscam na RUBY prosím o riešenie.

moje oscam.conf

# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r8777
# Read more: http://www.streamboard.tv/svn/oscam/tru ... m.conf.txt

[global]
disablelog = 1
logfile = 0
clienttimeout = 5000
clientmaxidle = 180
maxlogsize = 300
block_same_ip = 0
block_same_name = 0
lb_mode = 0
lb_save = 100
lb_min_ecmcount = 3
lb_retrylimit = 800
lb_auto_betatunnel = 0
preferlocalcards = 1


[dvbapi]
enabled = 1
au = 1
user = local
pmt_mode = 0


[cccam]
port = 12000
nodeid =
version = 2.1.4
stealth = 1

[webif]
httpport = 8888
httpuser =
httppwd =
httpallowed = 0.0.0.0-255.255.255.255
hideclient_to = 0
httprefresh = 10
httppollrefresh = 10
http_status_log = 1

moje oscam.user

[account]
user = local
au = 1
group = 1,2


moje oscam.server

[reader]
label = ipsd_newcamd
protocol = newcamd
device = xxxxxxxx
key = 0102030405060708091011121314
user = xxxxxxxx
password = xxxxxxxx
disableserverfilter = 1
connectoninit = 1
caid = 0D96,0D97,1880,1802,1830,0500,4AEE,1803,0100,0963,098C,1702,1833,5581,0B00,1810,1805
ident = 0D96:000004;0D97:000004;1880:000000,002111,002011;1802:000000,002111,002011;1830:000000,003411,008011;0500:023100,023700,050100,041700,040600,040620;4AEE:000000;1803:000000,007101,007001;0100:000068,000065;0963:000000;098C:000000;1702:000000;1833:000000;5581:000000;0B00:000000;1810:000000,004001,004101
group = 2
dropbadcws = 1
disablecrccws = 1
audisabled = 1

[petersk]

Nemám tento box, ale zdá sa mi, že problém je s boxtype. Skús cez webif oscamu v menu config/dvb-api odskúšať boxtype. Alebo do oscam.conf v sekcii dvbapi dopísať boxtype = dreambox

[motofun]

Ďakujem pekne. Ide to už.

[pedrosino]

Ďakujem pekne. Ide to už.

a ako si to teda upravil? dik

[petermasik]

dobry den mam prismcube asi dva dni no stale sa nemozem pripojit na server czsk
v oscame mam takto nastavenie:
oscam.conf
# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r9969
# Read more: http://www.streamboard.tv/svn/oscam/tru ... m.conf.txt

[global]
disablelog = 1
logfile = 0
clienttimeout = 5000
clientmaxidle = 180
maxlogsize = 300
block_same_ip = 0
block_same_name = 0
lb_mode = 0
lb_save = 100
lb_min_ecmcount = 3
lb_retrylimit = 800
lb_auto_betatunnel = 0
preferlocalcards = 1


[dvbapi]
enabled = 1
au = 1
user = local
pmt_mode = 0


[cccam]
port = 12000
nodeid =
version = 2.1.4
stealth = 1

[webif]
httpport = 8888
httpuser =
httppwd =
httpallowed = 0.0.0.0-255.255.255.255
hideclient_to = 0
httprefresh = 10
httppollrefresh = 10
http_status_log = 1

dalej oscam.user
# oscam.user generated automatically by Streamboard OSCAM 1.20-unstable_svn build #6020
# Read more: http://streamboard.gmc.to/svn/oscam/tru ... m.user.txt

[account]
user = local
au = 1
group = 1,2

dalej oscam.server
[reader]
label = ipsd_cccam
protocol = cccam
device = sat.ipsd.tv,15500
key = 0102030405060708091011121314
user = xxxxxxxxx
password = xxxxxxxx
disableserverfilter = 1
connectoninit = 1
caid = 0D96,0D97,1880,1802,1830,0500,4AEE,1803,0100,0963,098C,1702,1833,5581,0B00,1810,1805
ident = 0D96:000004;0D97:000004;1880:000000,002111,002011;1802:000000,002111,002011;1830:000000,003411,008011;0500:023100,023700,050100,041700,040600,040620;4AEE:000000;1803:000000,007101,007001;0100:000068,000065;0963:000000;098C:000000;1702:000000;1833:000000;5581:000000;0B00:000000;1810:000000,004001,004101
group = 1
dropbadcws = 1
disablecrccws = 1
audisabled = 1

dalej oscam.dvbapi
I: 0666 1
P: 0624 1
I: 0D03
I: 0D96
I: 0D0F
I: 0D70

kartu mam v citacke funguje je to skylink ice

za kazdu radu vopred dakujem uz som zufali a neviem ako dalej

[tomko]

Oscam dvbapi mas 0d96 ze ma ignorovat.bud to vsetko vymaz ale pri nom daj P
Preco mas pri ccam key 0102...? Ten sa dava pri mgcamd
Mas tam toho zbytocne vela,ident by som dal prec.staci device,meno,heslo,group,cccam version

[petermasik]

tomko dakujem za radu uz to ide super velke dikes uz dva dni som sa trapil

[tomko]

Neni zac

[motofun]

Ďakujem pekne. Ide to už.

a ako si to teda upravil? dik

v prvom rade som doplnil boxtype na dreambox v oscam.conf a vyhodil som všetko, čo som nepotreboval a ostalo to takto:

[global]
disablelog = 1
logfile = 0
clientmaxidle = 180
maxlogsize = 300
preferlocalcards = 1
block_same_ip = 0
block_same_name = 0
lb_save = 100
lb_min_ecmcount = 3
lb_retrylimit = 800
lb_auto_betatunnel = 0

[dvbapi]
enabled = 1
au = 1
user = local
boxtype = dreambox

[webif]
httpport = 8888
httprefresh = 10
httpallowed = 0.0.0.0-255.255.255.255
hideclient_to = 0

oscam.server som nechal len toto:

[reader]
label = Reader-0
description = czsk.tv
protocol = newcamd
device = sat.ipsd.tv,14500
key = 0102030405060708091011121314
user = xxxxx
password = xxxxxxxxxx
disableserverfilter = 1
connectoninit = 1
group = 2

oscam.user zostal takto:

[account]
user = local
au = 1
group = 1,2

[motofun]

OK.

Už týždeň študujem ten oscam, ale neviem sa dostať ku riešeniu reshare czsk.tv pre dva tunery v prismcube. Má niekto nastavené oscam na dva tunery pre czsk.tv? Mohol by ma nakopnúť? v domácnosti používam zatiaľ len jeden prijímač, ale v budúcnosti plánujem druhý.

OSCAM je pre mňa španielska dedina, ale učím si i napriek môjmu veku. Ďakujem za rady a návrhy.